5V STEPPER MOTOR 28BYJ-48 with ULN2803 Driver Board

5V STEPPER MOTOR 28BYJ-48 with ULN2803 Driver Board

Stepper motor 28BYJ-48 Parameters

·        Rated voltage 5VDC

·        Number of Phase 4

·        Speed Variation Ratio 1/64

·        Stride Angle 5.625° /64

·        Frequency : 100Hz

·        DC resistance 50Ω±7%(25)

·        Idle In-traction Frequency : > 600Hz

·        Idle Out-traction Frequency : > 1000Hz In-traction Torque >34.3mN.m(120Hz) Self-positioning  

·        Torque >34.3mN.m Friction torque : 600-1200 gf.cm

·        Pull in torque : 300 gf.cm

·        Insulated resistance >10MΩ(500V)

·        Insulated electricity power 600VAC/1mA/1s

·        Insulation grade A

·        Rise in Temperature <40K(120Hz)

·        Noise <35dB(120Hz,No load,10cm)

·        Unipolar stepper with 0.1" spaced 5-pin cable connector

·        513 steps per revolution

·        1/16.032 geared down reduction

·        Dimensions: 28mm diameter, 20mm tall not including 9mm shaft with 5mm diameter

·        9" / 23 cm long cable

·        Holding Torque: 150 gram-force*cm, 15 N*mm/ 2 oz-force*in

·        Shaft: 5mm diameter flattened

·        Approx 42 ohm DC impedance per winding

·        Dimension (LXWXH):42.0X30.8X28.9mm

·        Weight: 33 g.

ULN2803 Driver Board Specifications

·        Use ULN2803, can drive 8 channel low level equipment

·        Per channel current: 500mA.

·        High Voltage Outputs up to 50V.

·        Output Clamp Diodes.

·        Inputs compatible with various Logic Voltages.

·        On-board Power Supply Filtering Capacitors

·        On-board LED Power Indicator

·        On-board LED Output Indicators

·        You can directly drive Two 4Phase Stepper Motors in Same Time

·        PCB Size(LxWxH in mm):59.6x1.5x56.5mm

·        Weight: 20g.

Packing content

·        1 x Drive Module Board ULN2803 

·        1 x Stepper motor 28BYJ-48.

Write a review

Note: HTML is not translated!
    Bad           Good

Stepper Motor DC 5V 4-phase 5 line 28BYJ-48523.99KBDownload
ULN2803-Datasheet375.44KBDownload
2 Product(s) Sold
  • ₹385.00
If four things are followed - having a great aim, acquiring knowledge, hard work, and perseverance - then anything can be achieved.
- Dr. A.P.J Abdul Kalam