L293D Motor driver Module

L293D Motor driver Module

This module is a medium power motor driver perfect for driving DC motors and Stepper motors. It uses the popular L293D H-bridge motor driver IC. It can drive 4 DC motors in one direction, or drive 2 DC motors in both the directions with speed control. The driver greatly simplifies and increases the ease with which you may control motors, relays, etc from microcontrollers. It can drive motors up to 12 V with a total DC current of up to 600mA. This board has a feature of onboard 5V regulator 7805.

Specifications

·       Chipset: L293D

·       Dual H-Bridge Module

·       Motor Power Supply Voltage: 4.5V-25V

·       Maximum Motor Driving Current: 0.6A per bridge (1.2A peak non-repetitive)

·       5V Voltage Regulator on board

·       Operating Voltage: 3.3V - 5V (for board logic)

·       Overheating protection

·       Onboard Motor Direction indicator LED,s

·       Noise Protection with internal clamp diodes (0V to 1.5V is considered logic low)

·       The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays, solenoids, DC and stepping motors) and switching power transistors

·       To simplify use as two bridges each pair of channels is equipped with an enable input

·       Separate supply input is provided for the logic, allowing operation at a lower voltage

·       This device is suitable for use in switching applications at frequencies up to 5 kHz.

·       Arduino & Raspberry Pi Compatible

·       Dimensions: 46x1.5x49.3mm

·       Weight:14g.

Write a review

Note: HTML is not translated!
    Bad           Good

L293D Datasheet495.98KBDownload
Module Pin Details13.06KBDownload
312 Product(s) Sold
  • ₹180.00
If four things are followed - having a great aim, acquiring knowledge, hard work, and perseverance - then anything can be achieved.
- Dr. A.P.J Abdul Kalam